Yeastar Technology TA1600 User Manual page 22

2) Common Rules
There is no default rule; you can create one as required.
Table 3-8 Description of Common Rule Settings
Items Description
Name A name for this rule, e.g. "HTTP".
Simple description for this rule. E.g. Accept the specific host to access
Description
the web interface for configuration.
Protocol The protocols for this rule.
Initial port should be on the left and end port should be on the right. The
Port
end port must be equal to or greater than start port.
The IP address for this rule. The format of IP address is: IP/mask
E.g. 192.168.5.100/255.255.255.255 for IP 192.168.5.100
IP
E.g.
192.168.5.255 .
MAC The format of MAC Address is XX:XX:XX:XX:XX:XX, X means 0~9 or
Address A~F in hex, the A~F are not case sensitive.
Accept: Accept the access from remote hosts.
Action Drop: Drop the access from remote hosts.
Ignore: Ignore the access.
Note: The MAC address will be changed when it's a remote device, so it will not be
working to filter using MAC for remote devices.
TA1600/2400/3200 FXS Gateway User Manual
rules defined. To avoid locking the devices, at least one "TCP"
accept common rule must be created for port used for SSH
access, port used for HTTP access and port sued for CGI
access.
Figure 3-17 Common Rule
192.168.5.0/255.255.255.0 for IP from 192.168.5.0 to
22/60