Gateway Settings; General Preferences - Yeastar Technology TA3210 User Manual

Gateway Settings

This chapter explains Gateway settings, which can be applied globally to TA3210. The
gateway settings can be configured under Gateway→ Gateway Settings.

General Preferences


General Preferences
Item
General Settings
MAX Call Duration
G723 Encoding Rate
FXO Mode
Voice Settings
Enable Jitterbuffer
Jitter Buffer MaxSize
VAD
Echo Tail Length
Figure 6-1 General Preferences
Table 6-1 General Preferences
Description
The absolute maximum amount of time permitted for a call.
A setting of 0 disables the timeout.
Set the G723 encoding rate.
Select country to set the On Hook Speed, Ringer
Impedance, Ringer Threshold, Current Limiting, TIP/RING
voltage adjustment, Minimum Operational Loop Current,
and AC Impedance as predefined for your country's analog
line characteristics. The default setting is "FCC".
Forces the use of a jitter buffer on the received side of a
SIP channel. The call quality will be improved if this option
is enabled.
Max length of the jitter buffer in milliseconds.
Default: 40.
Voice Activity Detection.
In some cases, the echo canceller doesn't train quickly
enough and there is echo at the beginning of the call which
then quickly fades out.
TA3210 User Manual
34/66