Iax Settings - Yeastar Technology TA1600 User Manual

Pedantic
Alwaysauthreject
Session-timers
Session-expires
Session-minse
Session-refresher

4.2.4 IAX Settings

IAX is the Internal Asterisk Exchange protocol, you can connect to TA FXS Gateway
or register IAX trunk to another IAX server. It's supported by the asterisk-based
IPPBX.
Items
Bind Port
Bandwidth
Min Registration Time
Max Registration Time
TA1600/2400/3200 FXS Gateway User Manual
that it is disabled for security reason.
Enable pedantic parameter. Default: no.
If enabled,
rejects "Register" or "Invite" packets, TA FXS
Gateway
using "SIP404 NOT FOUND". It's recommended
that it is enabled for security reason.
Enable session-timer mode, default: yes. If you find
the call is cut off every 15 minutes every time,
please disable this.
The max refresh interval
The min refresh interval, which mustn't be shorter
than 90s.
Choose the session-refresher, the default is Uas.
Figure 4-19 IAX Settings
Table 4-10 Description of IAX Settings
Description
Port used for IAX2 registrations. Default is 4569.
Low/medium/high with this option you can control which
codec to be used.
Minimum duration (in seconds) of an IAX2 registration.
Default is 60 seconds
Maximum duration (in seconds) of an IAX2 registration.
when TA FXS
always respond
Gateway
the packets
47/60