Gateway Settings; General Preferences - Yeastar Technology TA810 User Manual

Gateway Settings

This chapter explains Gateway settings, which can be applied globally to TA410/810.
The gateway settings can be configured under Gateway→ Gateway Settings.


General Preferences

General Preferences
General Settings
MAX Call Duration
G723 Encoding Rate
FXO Mode
Voice Settings
Enable Jitter buffer
Jitter Buffer MaxSize
VAD
Echo Tail Length
Figure 6-1 General Preferences
Table 6-1 General Preferences
The absolute maximum amount of time permitted for a
call. A setting of 0 disables the timeout.
Set the G723 encoding rate.
Select country to set the On Hook Speed, Ringer
Impedance, Ringer
TIP/RING voltage adjustment, Minimum Operational
Loop Current, and AC Impedance as predefined for
your country's analog line characteristics. The default
setting is "FCC".
Forces the use of a jitter buffer on the received side of
a SIP channel. The call quality will be improved if this
option is enabled.
Max length of the jitter buffer in milliseconds.
Default: 40.
Voice Activity Detection.
In some cases, the echo canceller doesn't train quickly
enough and there is echo at the beginning of the call
which then quickly fades out.
TA410/810 User Manual
Threshold, Current Limiting,
33/63