Gateway Settings
This chapter explains Gateway settings, which can be applied globally to TA1610. The
gateway settings can be configured under Gateway→ Gateway Settings.
General Preferences
General Preferences
General Settings
MAX Call Duration
G723 Encoding Rate
FXO Mode
Voice Settings
Enable Jitterbuffer
Figure 6-1 General Preferences
Table 6-1 General Preferences
The absolute maximum amount of time permitted for a
call. A setting of 0 disables the timeout.
Set the G723 encoding rate.
Select country to set the On Hook Speed, Ringer
Impedance,
Ringer
TIP/RING voltage adjustment, Minimum Operational
Loop Current, and AC Impedance as predefined for
your country's analog line characteristics. The default
setting is "FCC".
Forces the use of a jitter buffer on the received side of
a SIP channel. The call quality will be improved if this
TA1610 User Manual
Threshold,
Current
Limiting,
40/82