Yamaha 2013 FJR1300AS Service Manual page 773

SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE
Diagnos-
tic code Item
No.
Sh_ _63 Clutch actuator oper-
ation
TIP
If any of the following
fault codes are de-
tected, do not exe-
cute the diagnostic
mode.
Sh_ _11, Sh_ _12,
Sh_ _13, Sh_ _15,
Sh_ _16, Sh_ _17,
Sh_ _25, Sh_ _26,
Sh_ _36, Sh_ _37,
and Sh_ _44
Sh_ _64 Shift actuator opera-
tion
TIP
If any of the following
fault codes are de-
tected, do not exe-
cute the diagnostic
mode.
Sh_ _11, Sh_ _12,
Sh_ _14, Sh_ _15,
Sh_ _16, Sh_ _18,
Sh_ _19, Sh_ _25,
Sh_ _37, and Sh_
_51
Meter display
Actuates the clutch
actuator.
Actuates the shift
actuator.
9-16
Procedure
The clutch actuator can be operated in this
mode.
Check the shift down indicator light and the
operating sound of the clutch actuator.
1. Operate the hand shift lever (shift up)
and the brake lever or brake pedal at
the same time.
The clutch engages and the shift down
indicator light comes on.
2. Operate the hand shift lever (shift up)
and the brake lever or brake pedal at
the same time.
The clutch disengages and the shift
down indicator light goes off.
The shift actuator can be operated in this
mode.
Check the shift down indicator light and the
operating sound of the shift actuator.
1. Operate the hand shift lever (shift up)
and the brake lever or brake pedal at
the same time.
The transmission shifts up and the shift
down indicator light comes on for ap-
proximately 1 second.
If the transmission gear is not engaged
properly, the shift down indicator light
will flash for approximately 1 second.
2. Operate the hand shift lever (shift down)
and the brake lever or brake pedal at
the same time.
The transmission shifts down and the
shift down indicator light comes on for
approximately 1 second.
If the transmission gear is not engaged
properly, the shift down indicator light
will flash for approximately 1 second.
(MCU)