Yamaha 2013 FJR1300AS Service Manual page 57

2. Push the menu switch "MENU".
3. Use the select switch to select the desired
brightness level, and then push the menu
switch "MENU" to return to the setting mode
menu.
Brightness
Setting the clock
1. Use the select switch to highlight "Clock".
MENU
Grip Warmer
Maintenance
Time Trip
Unit
Display
Brightness
Clock
2. Push the menu switch "MENU".
3. When the hour digits start flashing, use the
select switch to set the hours.
Clock
5 55
4. Push the menu switch "MENU", and the
minute digits start flashing.
5. Use the select switch to set the minutes.
6. Push the menu switch "MENU" to return to
the setting mode menu.
Resetting all of the display items
1. Use the select switch to highlight "All Reset".
2. Push the menu switch "MENU".
3. Use the select switch to highlight "YES", and
then push the menu switch "MENU".
TIP
The odometer and the clock cannot be reset.
Self-diagnosis device
1 2
1. Immobilizer system indicator light "
2. Engine trouble warning light "
3. Fault code display
This model is equipped with a self-diagnosis de-
vice for various electrical circuits. If a problem is
detected in any of those circuits, the engine trou-
ble warning light will come on and the informa-
tion display will indicate a fault code.
If the information display indicates any fault
codes, note the code number, and then check
the fuel injection system. (Refer to "FUEL IN-
JECTION SYSTEM" on page 8-35.)
1-48
FEATURES
MENU
Maintenance
Time Trip
Unit
Display
Brightness
Clock
All Reset
All Reset
NO
YES
GEAR
N
A.TEMP
C.TEMP
TIME TRIP
3
"
˚C
25
˚C
Lo
0:06
"