Yamaha 2013 FJR1300AS Service Manual page 21

Using the resume function
Push the "RES+" side of the cruise control setting switch to reactivate the cruise control system. The
traveling speed will return to the previously set cruising speed. The cruise control setting indicator light
"SET" will come on.
If the "SET–" side of the cruise control setting switch is pushed during the resume operation, the current
traveling speed will be set as the new cruising speed.
EWA1MC1007
WARNING
It is dangerous to use the resume function when the previously set cruising speed is too high
for current conditions.
TIP
• The resume function operates when riding in 3rd gear at speeds between about 50 km/h (31 mph)
and 160 km/h (100 mph), or 4th or 5th gear at speeds between about 50 km/h (31 mph) and 180 km/h
(112 mph).
• Pushing the power switch while the system is operating will turn the system off completely and erase
the previously set cruising speed. You will not be able to use the resume function until a new cruising
speed has been set.
Operation chart
A
a b
D
C
E
B
SET
A. Operation
B. Indication
C. Speed
D. 180 km/h (112 mph)
E. 50 km/h (31 mph)
F. Time
RES
SET
c d e
SET
b f g
a. Cruise control power switch "
b. Manual acceleration
c. Push the "SET–" side of the cruise control
setting switch
d. Currently set cruising speed increases
e. Currently set cruising speed decreases
f. New cruising speed is set
g. Currently set cruising speed is canceled
h. Resume operation starts
i. Resume operation finishes
j. Currently set cruising speed
1-12
FEATURES
RES
SET
b h i
j
SET SET
" "ON"
F