Installing The Canopy - Seagull Models ZERO FIGHTER Assembly Manual

ZERO FIGHTER.
INSTALLING THE PILOT.
! 1.If you plan on using a pilot in your Zero
fighter .46, now is the time to mount it to the
cockpit floor area of the hatch.
Glue attached.

INSTALLING THE CANOPY.

! 1.Locate the canopy and note the trim
lines. Carefully trim out the canopy using regu-
lar scissors. Use care in cutting out the canopy.
INSTRUCTION MANUAL
! 2. After cutting out the canopy, trial fit it to
fuselage. Trim as necessary to make a proper
fit.
! 3.After confirming the fit of the canopy to
the fuselage, attach it to the fuselage using
canopy glue. Masking tape can be used to
hold the canopy in place while the glue dries.
Allow the canopy glue to dry.
Glue attachment
Securing by 4 machine
screws ( 1mmx 5mm)
for each corner
9