Seagull Models ZERO FIGHTER Assembly Manual page 3

ZERO FIGHTER.
INSTRUCTION MANUAL
NOTE: To avoid scratching your new aero-
plane we suggest that you cover your
workbench with an old towel. Keep a
couple of jars or bowls handy to hold
the small parts after you open the
bags.
Please trial fit all parts. Make sure you
have the correct parts and that they fit
and are aligned properly before gluing!
This will ensure proper assembly as
the Zero fighter is made from natu-
ral materials and minor adjustments
may have to be made.
The paint and plastic parts used in
this kit are fuel proof. However, they
are not tolerant of many harsh chemi-
cals including the following: paint
thinner, cyano-acrylate glue accel-
erator, cyanoacrylate glue de-bonder
and acetone. Do not let these chemi-
cals come in contact with the colours
on the covering and the plastic parts.
3