Adding Decals; Installing The Stopper Assembly - Seagull Models ZERO FIGHTER Assembly Manual

ZERO FIGHTER.

ADDING DECALS.

! 1.Locate the decal sheet include in the kit.
Use the box art photos and some pictures
below as an approximate position reference
for the application of the inclued decals.
10
Instruction Manual
FUEL TANK
PARTS REQUIRED
! {1} Molded Nylon Fuel Tank
! {1} Preassembled Stopper Assembly
! {1} Metal Weighted Pick-Up
! {1} Molded Foam Fuel Tank Support

INSTALLING THE STOPPER ASSEMBLY

! 1) Using a modeling knife, carefully cut
off the rear portion of one of the two nylon
tubes leaving 1/2" protruding from the rear of
the stopper. This will be the fuel pick up tube.
! 2) Using a modeling knife, cut one length
of silicon fuel line. Connect one end of the
line to the weighted fuel pickup and the other
end to the nylon pickup tube.