Setting Procedure; Adjusting The Angle Of The Display - Siemens hicom 150 e User Manual

Setting Procedure

1.
2.
3.
4.

Adjusting the Angle of the Display

Precondition: Your telephone is in the idle state.
Call up the menu for telephone settings.
or
Scroll to "Ring volume:?", "Ring tone:?",
or "Speakerphone mode?" and confirm your se-
lection.
or Check the display and adjust the setting.
To save the setting, press the "OK" dialog key to
confirm your selection.
To prevent glare you can tilt the display unit on the
telephone. Adjust the display unit so that you can
clearly read the display.
Setting/Programming Your Telephone
optiset E entry und optiset E basic:
For details of the procedures refer to the
operating instructions for this telephone
39