Relocate Procedure (Phone Change) - Siemens hicom 150 e User Manual

General System Features

Relocate Procedure (Phone Change)

1.
9 4 1 9
2.
1.
2.
9 4 1 9
172
You can log off and disconnect your system tele-
phone from its present connection and plug it in
and log back on at a different connection (reloca-
tion destination).
When you do this, all settings applying to your sys-
tem telephone (such as station number, DID num-
ber, name and key assignments) are retained.
Precondition: Your system telephone is the
MASTER; it is the first telephone on the connec-
tion. All equipment that is plugged into the tele-
phone must be taken with it. No other replace-
ment procedure has been initiated.
Logging the telephone off
Enter the code for "Stn relocate."
Pull the telephone plug from the wall outlet.
Logging the telephone on at the relocation
destination
Insert the telephone plug in the required wall out-
let.
Enter the code for "Stn relocate."