Labeling Keys; Attaching A Station Number Label; Key Labeling Program (Not For U.s.) - Siemens hicom 150 e User Manual

Hicom 150 E Office and optiset E

Labeling Keys

Attaching a Station Number Label

Key Labeling Program (not for U.S.)

10
Key labeling sheets containing pre-cut cards are
supplied with each system telephone and key
module in an accessory pack. These cards can be
used on both sides, and are inserted into the tele-
z
To label the fixed function keys (
Æ Æ
15, 16), punch out the preprinted label-
ing card. Insert the card and cover it with the
plastic foil supplied, as shown in the drawing.
z
To label the programmable keys (
Æ
17), write in the white area of the labeling
cards the station numbers or functions which
you have programmed. Punch out the card,
insert it, and cover it with the plastic foil sup-
plied, as shown in the drawing.
A sheet with station number labels is supplied
with each system telephone.
Fill out the label (fire, police, your own station num-
ber) and punch it out. Lift the handset and attach
the label in the recess of the system telephone.
You can use the WINTASBE labeling program (or-
der number P31003-E80-T101-*-19) to print the
names and functions on the labeling cards of all op-
tiset E telephones. For many optiset E telephones,
this can be done on a perforated A4 sheet (order
number A31003-E80-T100-*-19) containing all la-
beling cards.
Æ Æ
13, 14,
Æ Æ
15, 16,