Entering An Appointment/Appointment Reminder - Siemens hicom 150 e User Manual

Entering an Appointment/Appointment Reminder

1.
Program/Service
2.
0 9
You can enter a single appointment that will take
place in the next twenty four hours, or you can en-
ter a daily recurring appointment.
At the time set for the appointment, your tele-
phone rings for approximately twenty seconds to
remind you of your appointment. The time that you
have entered appears on the display. The appoint-
ment call is deleted when you acknowledge it, or it
is deleted automatically after it has been repeated
five times between intervals of one minute.
Entering an appointment
Press the Program/Service key; the LED lights up.
Scroll to "Timed reminder on?" and confirm your
selection.
or
4 6
Enter the code for "Timed reminder on".
From this point on, follow the user prompts.
Note the format that you have to use for the time:
Appointment at (HHMM); hh = hours (two digits);
mm = minutes (two digits).
0 5
Example: 0905 for 9.05 h. (= 9.05 a.m.)
or 1430 for 14.30 h. (= 2.30 p.m.) .
Select "One time only" or "Daily".
Setting/Programming Your Telephone
optiset E entry, optiset E basic and com-
mercially available telephones:
You can enter only a single appointment
For details of the procedures refer to the
operating instructions for this telephone
51