Aileron Servo Tray Installation; Zusammenbau Von Fahrwerkstrebe Und Strebenhalterung; Assemblage Du Train D'atterrissage Et Des Entretoises Des Haubans; Installazione Carrello E Supporti Montanti - Hangar 9 Composite QQ Yak-54 2.6m Instruction Manual

aileron serVo tray installation •
1
Mark the servo hatch mounting locations onto the wing.
2
Using a drill and 1/16-inch bit, drill the marked locations.
3
Run the screws in and out of the mounting locations and apply thin CA to the
holes to strengthen the wall
13