Hangar 9 Composite QQ Yak-54 2.6m Instruction Manual page 72

canister installation option • • •
6
Using thin CA glue the mount. Wait until CA is dry and repeat the process. This
should be done for both sides of the battery tray mount. Do not use accelera-
tor. Use medium CA to fill any remaining gap.
72
7
Once the position of the battery is known, glue the tray using epoxy and
micro-balloon. Tray stands are cut such that to fit the round shape of the
fuselage for proper contact. Make sure to glue the round part of the leg to the
fuselage.
8
The picture above shows the tray with battery installed.