Table of Contents
Advertisement
AILERON SERVO INSTALLATION AND HINGE LINE SEALING
10
Dry fit the hatch in the wing opening, if any interference, grind the corner
using a rotary tool and sanding drum. Remove a little at a time and check. Do
not remove too much and get close to the mounting location.
24
11
Connect a JR Heavy-Duty 18-inch extension to the outboard servo and a
6-inch to the inboard servo Use a string and masking tape to secure the
connection
12
Pass a rod through the root to the servo box and tape the servo extension to
the rod and pull through the wing root.
Advertisement
Table of Contents
