Einbau Des Empfängers; Installation Des Interrupteurs Et Des Régulateurs 40 Installation Du Récepteur; Installazione Del Ricevitore - Hangar 9 Composite QQ Yak-54 2.6m Instruction Manual

eleVator serVo and stab installation •
10
Turn the power off to the servo and move the arm to the sides to install the
servo arm set screws
42
11
Prepare the ball links so that the length of the rod is 52mm between ball links
12
Using a crescent wrench and 3/32-inch ball driver, install the ball link onto
the outermost hole in the Hangar 9 servo arm