Table of Contents
Advertisement
AILERON SERVO INSTALLATION AND HINGE LINE SEALING
1
The aileron hinge line needs to be seal from the bottom. Deflect the aileron
fully and clean the bevels using alcohol swab.
2
Use clear packing tape that is 1 1/2-inch to 2-inch wide. Cut pieces as long
as the length between each two hinge. Fold the tape and carefully apply to
the hinge line. Packing tapes are strong, if removing the tape is necessary, do
so very carefully as not to take the paint off the surface.
3
Patiently and carefully complete the length of the aileron on both wings.
21
Advertisement
Table of Contents
