Using Remote Programming to Change the Password
You can use Remote Programming to change the station (phone) password.
To use Remote Programming to change the station password:
Using Remote Programming to Change DND Settings
See "Using Do-Not-Disturb (DND)" on
To use Remote Programming to turn on DND:
To use Remote Programming to turn off DND:
Mitel
®
5312/5324 IP Phone User Guide – Issue 1, September 2009
1. Do one of the following:
•
Call your DISA number (provided by your system administrator). If necessary, enter
your (DISA) password.
•
Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #.
5. Dial 392.
6. Enter the new password followed by #.
7. Enter the new password again followed by #.
1. Do one of the following:
•
Call your DISA number (provided by your system administrator). If necessary, enter
your (DISA) password.
•
Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #.
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line message
text (if applicable).
Follow steps 1. through 4. above, and then dial 371.
page 43
for more information about using DND.
Call Features
Page 39