Wipe Pattern Operations In The Flexi Pad; Recalling A Wipe Snapshot; Selecting The Wipe Pattern - Sony MVS-3000 System User Manual

Button displays
In the Setup menu, you can select whether the memory
recall buttons show the pattern number or register name.
1 "Settings for the Flexi Pad and Wipe
For details,
Snapshot Menus" (p. 237).
Saving a wipe snapshot from the menu
1
Make the wipe settings that you want to save.
2
In the Wipe Snapshot menu, press [Store], lighting it
orange.
3
Press the memory recall button for the register in
which you want to save.
Notes
If you press a button which is already lit, this overwrites
the contents of the register.
Recalling a wipe snapshot from the menu
In the Wipe Snapshot menu, press the memory recall
button for the wipe snapshot you want to recall.
This recalls the wipe snapshot, and the button you pressed
lights orange.
In the upper left is shown the currently recalled register
name or number.
Notes
A setting in the Setup menu determines whether register
names or pattern numbers appear.
Deleting a wipe snapshot from the menu
1
In the Wipe Snapshot menu, press [Delete].
2
Press the memory recall button for the wipe snapshot
you want to delete.
Wipe Pattern Operations
in the Flexi Pad

Recalling a Wipe Snapshot

To recall a wipe snapshot in the Flexi Pad, use the
following operation.
1
Press the [WIPE] button in the Flexi Pad.
90

Wipe Pattern Operations in the Flexi Pad

This switches the memory recall section to wipe
snapshot mode.
WIPE button Alphanumeric display
Region selection Memory recall section
buttons
You can change the indications for buttons [0] to [9] in
the memory recall section to pattern images, using the
Engineering Setup >Panel >Operation >Flexi Pad
Mode menu (7326.3).
2
Select the region for the wipe snapshot to be recalled
with the region selection buttons.
3
Press the button (lit orange) in the memory recall
section corresponding to the register in which the
desired wipe snapshot is stored.
The button you pressed lights yellow, and this recalls
the saved wipe snapshot.
The alphanumeric display shows the corresponding
pattern number or register name.

Selecting the Wipe Pattern

1
Press the [WIPE] button, and select the region with the
region selection buttons.
2
Press the [PTN NO.] button in the memory recall
section.
The [PTN NO.] button lights green.
3
Use the numeric keypad to enter the pattern number
consisting of up to three digits, and press the [ENTR]
button.
This confirms the input, and the pattern number
(1 p. 264) appears in the alphanumeric display.
The [PTN NO.] button light changes to orange, and the
system returns to wipe snapshot mode.
Adjustment knobs