Permobil F5 Corpus
Repairs
UniTrack rails
For this task the following tools are necessary:
• 1 Allen key 5 mm.
UniTrack rails are available in five different lengths that are used depending on the seat depth selected.
Removal
1. Remove the two screws that hold the rail in place. See fig. 186.
Assembly
1. Assemble the UniTrack rail using two screws. See fig. 186. Use a torque wrench to tighten the screws.
Tightening torque 9.8 Nm / 7.2 Ft/lbs.
Figure 186. The UniTrack rail is held in place by two screws.
108