Permobil F5 Corpus Service Manual page 97

Permobil F5 Corpus
Assembly
1. Raise the seat to its highest position.
2. Switch off the power supply using the ON/OFF key on
the control panel and switch the automatic main fuse
to Off. See Circuit breaker, Page 93.
3. Remove the chassis covers. See Covers, Page 13.
4. Remove the drive package covers including the front
fender. See Removal of the drive package covers in-
cluding the front fender, Page 18
5. Position the lights cabling on the chassis and assem-
ble the cables in the cable tunnels on the left and right
hand side of the chassis. See fig. 164.
6. Connect the connectors J4, J5 och J7 to the ICS Mas-
ter Module. See fig.165.
Figure 164. Lights cabling.
Figure 165. ICS Master Module.
Repairs
97