Permobil F5 Corpus
AP Elevator battery pole protection
Removal
1. Raise the seat to its highest position.
2. Switch off the main power switch on the control
panel.
3. Remove the top chassis cover. See Removal of the
chassis covers, Page 13.
4. Remove the battery pole protection by carefully lever-
ing its edges outwards and at the same time pull it off
from the AP Elevator. See fig. 108.
Assembly
1. Assemble the battery pole protection. Push the bat-
tery pole protection on to the AP Elevator. See fig.
109.
2. Assemble the top chassis cover. See Assembly of
the chassis covers, Page 15.
66
Figure 108. AP Elevator battery pole protection
Figure 109. AP Elevator battery pole protection
Repairs