Link Arms - Permobil F5 Corpus Service Manual

Permobil F5 Corpus Repairs

Link arms

For this task the following tools are necessary:
• 1 Torque wrench
• 1 Allen key socket 6 mm.
Removal of rear link arms
1. Switch off the main power switch on the control panel.
2. Lift up and chock up the wheelchair chassis so that the wheel in question is free of the ground.
3. Remove the shock absorber from the link arm. It is fitted with one screw (1) and washer (2). See fig. 48.
4. Remove the cover (3) from the link arm by pulling it straight out. If necessary, carefully lever it out using a screw-
driver in the slot on the cap. See fig. 48.
5. Remove the link arm (6), it's fitted with the screw (4) and the washer (5). See fig. 48.
For removal of wheel forks and wheels, see the respective chapters.
37