Permobil F5 Corpus Service Manual page 68

Permobil F5 Corpus
Removal
1. Raise the seat to its highest position.
2. Switch off the power supply using the ON/OFF key on
the control panel and switch the automatic main fuse
to Off. See Circuit breaker, Page 93
3. Remove the chassis covers. See Covers, Page 13.
4. Disconnect the motor cable from the ICS-Master
Module. See.fig. 110.
5. Remove the protective plate underneath the motor, it
is attached with two screws. See fig. 111.
6. Remove the ICS Master Module. See ICS master
module, Page 91.
7. Remove the ICS Master Module bracket. It is at-
tached with two screws. See fig. 112.
68
Figure 110. Disconnect the motor cable from the ICS-
Master Module.
Figure 111. Remove the protective plate underneath the
Figure 112. ICS Master Module bracket.
motor.
Repairs