Permobil F5 Corpus
Battery cable holder
For this task the following tools are necessary:
• 1 Spanner 8 mm.
Removal
1. Raise the seat to its highest position.
2. Switch off the main power switch on the control
panel.
3. Remove the chassis covers. See Removal of the
chassis covers, Page 13.
4. Remove the nut holding the cable holder. See fig.
152.
5. Remove the cable holder.
Assembly
1. Position the cable holder on the left attachment screw
of the Power Module. See fig. 152.
2. Wrap the cable connected to the left battery pole of
the rear battery one turn around the cable holder. See
fig. 152.
Figure 152. The cable holder is attached with a nut.
Repairs
87