Permobil F5 Corpus Service Manual page 125

Permobil F5 Corpus
Removal
1. Raise the chair to its highest position.
2. Switch off the main power switch on the control
panel.
3. Remove the seat cushion.
4. Remove seat plates. See Seat plates, Page 109.
5. Remove the UniTrack rail on the left hand side of the
seat. See UniTrack rails, Page 108.
6. Remove the rear UniTrack rail bracket on the left
hand side of the seat, it's attached with two screws.
See fig. 213.
7. Remove the rear attachment screw of the back rest
actuator. See fig. 214. Fold the backrest forward as
the screws are removed to avoid that the backrest is
falling backwards.
8. Remove the screws (1), (2) and (3). See fig. 215. Re-
move the broken part of the screw (2) by screwing it
upwards from underneath.
9. Check for damages on other parts and replace if
needed.
Figure 213. The UniTrack rail brackets is attached with
two screws.
Figure 214. Remove the rear attachment screw of the
back rest actuator.
Figure 215. Remove the screws (1), (2) and (3).
Repairs
125