Permobil F5 Corpus Service Manual page 126

Permobil F5 Corpus
Assembly
1. Fit the leaf spring (6) on the actuator bracket. See fig.
216.
2. Fit the key (5) on top of the leaf spring (6). See fig.
216.
3. Fit the bushing (4) on the screw (2). See fig. 216.
4. Fit the actuator bracket on to the seat frame using the
screw (2) with bushing (4). See fig. 217.
5. Fit the screw (1) at the front. See fig.217.
6. Fit the screw (3) at the back of the bracket with wash-
er (7) and locknut (8). See fig. 216.
7. Assemble the UniTrack rail bracket. It is attached with
two screws. See fig. 218.
8. Assemble the UniTrack rail. See UniTrack rails, Page
108.
9. Assemble the seat plates. See Seat plates, Page
109.
10. Assemble the seat cushion.
Items
1
2
3
4
5
6
7
8
126
Description
Screw, M6x12
Screw, M4x20
Screw, M6x20
Key
Leaf spring
Bushing
Locknut
Washer
Figure 216. Assembly of the backrest actuator bracket.
Figure 217. Assembly of the screws (1), (2) and (3).
Figure 218. The UniTrack rail brackets is attached with
two screws.
Repairs