Pyronix Enforcer 32WE Setup Manual page 7

Press the 'LEARN'
button on the detector/
contact until the LEDs
cycle, then release.
Press the 'LEARN' button
on the bell until the LEDs
cycle, then release.
Press and hold
a keyfob button
until the RED and
GREEN LED flash
fast, then release.
Input Learnt
Input learnt
successfully
Please note: that if learning smoke/carbon sensors
only a learn button and 1 LED will be present.
Bell Learnt
Bell learnt successfully
Enter user code
[******]
User Name
Code learnt
_
successfully
Enter user
name
Press t
7
The input types will then
need to be programmed.
Please see 'Change Inputs'
in the programming manual.
Select Button
Lock [1]
Button Action[2]
Use []
Set Area
to select
Use [] to
button.
select action
Press t
Press t