Pyronix Enforcer 32WE Setup Manual page 14

Diagnostics
Battery Status
The diagnostics function also monitors the battery of
each of input and bell so that any low/bad batteries can
be quickly recognised and replaced.
The Enforcer has an advanced battery test mechanism
that operates by monitoring all inputs/bells after 5
minutes from the start of the test. It will perform this test
every 16 seconds.
Once the function is entered, a count down from 300 will
begin. Press t to go to the main display, one of the
following will be displayed:
Testing Waiting for a battery result
Good At least one month of battery life remaining
Replace Battery needs to be replaced immediately
Diagnostics Continued...
Bell
No Signal
Battery?
Inputs?
Please Wait
300
Input
Good
Bells?
Bell
Good
Input
Excellent
14
[1]
[000]
Press t
Press t
Press t
Press t
[01]
Use [ ] Press t
Press t
[1]
Press t
[01]
[100]
Use [ ] Press t