Pyronix Enforcer 32WE Setup Manual page 24

KF4-WE
Changing The Battery
The batteries supplied have been chosen to
provide long service life whilst, for safety
reasons, having limited output current.
Replace only with approved batteries.
To prevent possible damage to components,
any static charge on your body needs to be
eliminated before touching the inside of the
unit. This can be accomplished by touching
some grounded/earthed metallic conductor
such as a radiator/pipework immediately
Resetting the keyfob
To do a nvm reset on the keyfob, first remove the battery, then press and hold down the lock and unlock
buttons together and reinsert the battery at the same time. Continue holding down the buttons for
another 10 seconds and then release.
4 Button, two way
II Button
-
(Negative)
CR-1/3N Li-Mn Cell (3 volts)
24
+
(Positive)