How to Transfer Files
To transfer files you need to physically connect the CT60 mobile computer to your
workstation (e.g., laptop or desktop computer) through a USB connection.
When the mobile computer is connected and USB is configured for file or photo
transfer, use a file browser (e.g., File Explorer or Windows Explorer) on your
workstation to transfer files between the two computers. If you are transferring files
to and from a Mac, use the Android File Transfer application (available from
www.android.com/filetransfer).
Note: File transfer through a USB connection is disabled by default. You need to configure
the USB connection for transferring files or photos.
You can use these accessories to connect your mobile computer to your
workstation:
•
•
Configure USB Connection and Transfer Files
Note: The CT60 supports Hi-Speed USB communications (USB 2.0) with a maximum data
transfer rate of 480 Mbps.
1. Connect the CT60 to your workstation.
2. On the CT60, swipe down from the top of the screen to see the notifications.
3. Tap USB charging this device.
4. Select either Transfer files or Transfer photos (PTP).
5. Open the file browser on your workstation
6. Browse to the CT60. You can now copy, delete, or move files between the CT60
Accessories for the Computer
The Dolphin CT60 ships with a battery, hand strap and stylus. All other accessories
are ordered and shipped separately. For help, contact your local sales
representative.
Note: Dolphin CT60 mobile computers are compatible with most Dolphin CT50
accessories. Check with your local sales representative about accessory compatibility
before ordering.
18
HomeBase or eHomeBase, and a standard USB Type B to A cable
USB adapter
and your workstation.
Dolphin CT60 Mobile Computer