Footrest - Otto Bock B 600 Instructions For Use Manual

Setting and Adjustment Possibilities
8.4

Footrest

To disassemble the footrest, the calf band must be unhooked.
Release the footrest lock (fig. 9), then swing away the footrest either inwards or
outwards. When in this position, the footrest can be pulled upwards and removed.
Take care not to get your fingers jammed when swinging the footrest away or back in
place.
For remounting, relocate the footrest in either the inner or outer positions and swing it
back into position so the lock engages.
Reattach the calf band to the holding device.
To adjust the height of the footplates loosen the screw at the footrest hanger and
adjust the height to suit your lower leg length and compensate for the seat cushion
height used.
The footplates adjustment must not be extended by more than 160 mm below the
hanger (fig. 10).
64
Fig. 9: Footrest lock
Fig. 10: Adjustment of the footrest hanger
B600 – Instructions for Use