Product Description; Delivery / Preparing The Wheelchair For Use; Delivery - Otto Bock A200 Instructions For Use Manual

Product DescriptionI | Delivery / Preparing the Wheelchair for Use
3 Product Description
The power wheelchair can only be used inside. It is de-
signed to be compact and manoeuvrable indoors.
The power wheelchair is controlled by a VR2 wheelchair
control unit. The latter includes a control panel to enter driv-
ing commands and display the current status as well as a
controller that operates the drive motors based on the in-
puts. Data transmission is realised via a bus system.
The VR2 control unit is programmable so that the controls
can be adjusted to individual user requirements. The speed,
acceleration and deceleration values, for example, can be
adjusted.
The special features of the power wheelchair include:
„ Compact design.
„ Easy to disassemble for transport.
„ Easy to service due to modular component group concept.
„ Easy access to all component groups.
92 Ottobock
|
4 Delivery / Preparing the Wheelchair for
Use

4.1 Delivery

INFORMATION
The options included in the delivery depend on the product
configuration that has been selected for the power wheelchair.
Scope of delivery includes:
„ Adapted power wheelchair with main components (see
fig. 2)
„ Charger
„ Instructions for Use
„ Options (see section 7)
Upon delivery by the specialist dealer the power wheelchair
is ready for use. All the settings correspond to the indica-
tions on the order form or are adjusted directly on site by the
dealer. The power wheelchair is adapted to the personal re-
quirements of the individual.
The functions of the individual components can be tested by
following the instructions in section 6. Possible malfunctions
are described in section 8.
A200