Preparation - Fujitsu scansnap ix500 Operator's Manual
Hide thumbs
Also See for scansnap ix500:
- Operator's manual (480 pages) ,
- Advanced operation manual (153 pages) ,
- Operating instructions manual (143 pages)
Table of Contents
Advertisement
3.
Connect to the ScanSnap.
Connect from a computer (→
Preparation
To connect the ScanSnap to a wireless LAN, prepare the following:
An environment in which a wireless LAN is available
When connecting the ScanSnap to a wireless LAN, you may need information for a
wireless access point such as an SSID (network name) and a security key (password).
For details, refer to the manual for the wireless access point.
ATTENTION
Do not place the following within 100 mm of the ScanSnap, or near your wireless access point.
Obstacles that block radio waves (e.g. walls or metal plates)
Devices that cause radio wave interference (e.g. microwave ovens or cordless phones), or
wireless devices
ScanSnap Connect Application (when connecting the ScanSnap to a mobile device)
Install ScanSnap Connect Application on the mobile device that you want to connect.
Download ScanSnap Connect Application for the mobile device from an application
store such as iTunes/App Store or Google Play.
Connecting the ScanSnap to a Wireless LAN
page
54)
Connect from a mobile device (→
51
page
55)
Advertisement
Table of Contents
