Fujitsu scansnap ix500 Operator's Manual page 300

Procedures
HINT
To use the Quick Menu, you need to select the [Use Quick Menu] checkbox in the ScanSnap setup
window.
For details about how to perform scanning by using the Quick Menu, refer to
Flow" (page 286).
1.
Load a document in the ScanSnap.
For details, refer to
ATTENTION
Up to ten files can be attached to an e-mail message.
When you scan more than one document with the scan settings shown below, multiple files are
created. Pay attention to the number of documents to scan:
File format: JPEG (*.jpg)
[Generate one PDF file per (n) page(s)] checkbox is selected
2.
Press the [Scan] button on the ScanSnap to start a scan.
The Quick Menu appears when the scanning is completed.
To change the settings for [Scan to E-mail], move the mouse cursor to the [Scan to E-
mail] icon , and then click
"Preferences" (page
Using ScanSnap with the Quick Menu (for Mac OS Users)
"How to Load Documents" (page
. For details about how to change the settings,
303).
300
"Basic Scanning Operation
63).