Fujitsu scansnap ix500 Operator's Manual page 453
Hide thumbs
Also See for scansnap ix500:
- Operator's manual (480 pages) ,
- Advanced operation manual (153 pages) ,
- Operating instructions manual (143 pages)
Table of Contents
Advertisement
2.
Rotate the bushing on the shaft.
3.
Remove the pick roller.
Gently lift the right side of the shaft (about 5 mm), move it towards the right, and then
pull it out.
ATTENTION
Be careful not to touch the gear near the bushing on the shaft as it contains grease.
453
Replacing the Roller Set
Bushing
Bushing
Advertisement
Table of Contents
