Fujitsu scansnap ix500 Operator's Manual page 151

Procedures
HINT
To use the Quick Menu, you need to select the [Use Quick Menu] check box in the ScanSnap setup
dialog box.
For details about how to perform scanning by using the Quick Menu, refer to
Flow" (page 114).
1.
Load a document in the ScanSnap.
For details, refer to
2.
Press the [Scan] button on the ScanSnap to start a scan.
The Quick Menu appears when the scanning is completed.
ATTENTION
You cannot start scanning when the Quick Menu is displayed. Save the scanned image to Magic
Desktop before scanning another document.
Do not move, delete or rename the scanned image in other applications when the Quick Menu is
displayed.
3.
Click the [Scan to Magic Desktop] icon
Magic Desktop starts up, and the scanned image created by the ScanSnap is saved
in Magic Desktop.
HINT
For details about how to use Magic Desktop, refer to the Magic Desktop Your Guide.
Using ScanSnap with the Quick Menu (for Windows Users)
"How to Load Documents" (page
151
"Basic Scanning Operation
63).
.