Preparation - Fujitsu ScanSnap iX500 Basic Operation Manual

Preparation

To connect the ScanSnap via wireless LAN, prepare the following:
l An environment in which a wireless LAN is available
When connecting the ScanSnap to a wireless access point, you may need information such as
an SSID (network name) and a security key (password).
For details, refer to the manual for the wireless access point.
ATTENTION
Do not place the following within 100 mm (3.9 in.) of the ScanSnap, or near your wireless access
point.
- Obstacles that block radio waves (such as walls and metal plates)
- Devices that may cause signal interference (such as microwaves and cordless phones) and
wireless devices
l ScanSnap Connect Application
To connect the ScanSnap and a mobile device, you need to install ScanSnap Connect
Application on your mobile device.
Download ScanSnap Connect Application for the mobile device from the following application
stores:
- App Store
- Google Play
- Amazon Appstore
Connecting the ScanSnap via Wireless LAN
48