Wireless Lan Specifications - Fujitsu scansnap ix500 Operator's Manual
Hide thumbs
Also See for scansnap ix500:
- Operator's manual (480 pages) ,
- Advanced operation manual (153 pages) ,
- Operating instructions manual (143 pages)
Table of Contents
Advertisement
Wireless LAN Specifications
The following table summarizes the wireless LAN specifications of the ScanSnap.
Model name
Observed standards
Frequency
Channels
Transfer speed (standard)
Communication mode
Communication distance
(predicted)
Security
Easy installation
*1 : Values depend on your country.
*2 : The values indicated on these standards are the maximum value, and do not indicate actual
*3 : To use the wireless function, you need a wireless access point that supports the same
*4 : The specifications may vary based on the connected wireless access point and the
*5 : You need a wireless access point that supports the WPS function.
(*1)
(*1)
communication speed.
standards.
surrounding environment.
iX500
IEEE802.11b / IEEE802.11g / IEEE802.11n
2.412 GHz to 2.462 GHz / 2.412 GHz to 2.472 GHz
1 to 11 ch / 1 to 13 ch
IEEE802.11b Max.: 11 Mbps
IEEE802.11g Max.: 54 Mbps
IEEE802.11n Max.: 72.2 Mbps (Only supports 20 MHz
bandwidth) (*2)
Infrastructure mode (*3)
Indoors, 50 m (Recommended: indoors, within 25 m) (*4)
WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WEP (64-bit/
128-bit)
WPS 2.0 supported (button / PIN code) (*5)
478
Wireless LAN Specifications
Advertisement
Table of Contents
