Fujitsu scansnap ix500 Operator's Manual page 143

Procedures
HINT
To use the Quick Menu, you need to select the [Use Quick Menu] check box in the ScanSnap setup
dialog box.
For details about how to perform scanning by using the Quick Menu, refer to
Flow" (page 114).
1.
Load a document in the ScanSnap.
For details, refer to
2.
Press the [Scan] button on the ScanSnap to start a scan.
The Quick Menu appears when the scanning is completed.
To change the settings for [Scan to Print], move the mouse cursor to the [Scan to Print]
icon , and then click
"Preferences" (page
3.
Click the [Scan to Print] icon
The [Scan to Print] dialog box appears.
HINT
You can configure the settings to not show the [Scan to Print] dialog box. If you configure the settings
to not show the [Scan to Print] dialog box, printing is performed directly.
For details about how to change the settings,
Using ScanSnap with the Quick Menu (for Windows Users)
"How to Load Documents" (page
. For details about how to change the settings,
145).
"Preferences" (page
143
"Basic Scanning Operation
63).
.
145).