Scanning - Fujitsu scansnap ix500 Operator's Manual

Scanning

Scan a document in the following procedure:
1.
Load a document in the ScanSnap.
For details, refer to
2.
Press the [Scan] button on the ScanSnap to start a scan.
HINT
The [Scan] button setting is [Duplex Scan (Double-sided)] in default. Note that you can switch the
[Scan] button setting to [Simplex Scan (Single-sided)] in ScanSnap Manager. For details, refer to
"Scanning Only One Side of a Document" (page
You can also start scanning from the ScanSnap Manager menu.
For details, refer to
ATTENTION
Do not connect or disconnect the ScanSnap and other USB devices during scanning.
Do not close the ADF paper chute (cover) during scanning.
Do not switch users during scanning.
Do not allow the ScanSnap to enter into sleep mode during scanning.
The [Scan] button on the ScanSnap flashes in blue throughout the scan.
The [ScanSnap Manager - Image scanning and file saving] window appears.
When you scan more than one document, the preview area will display the scanned
images in thumbnails. Up to 150 thumbnails can be displayed.
HINT
Press the [Stop] button to stop scanning the document. For details, refer to
(page 290).
The Quick Menu appears when the scanning is completed.
Basic Scanning Operation Flow (for Mac OS Users)
"How to Load Documents" (page
"ScanSnap Manager Menu (Mac OS)" (page
288
63).
381).
39).
Preview
"Stopping the Scan"