Fujitsu scansnap ix500 Operator's Manual page 328

4.
Press the [Scan] button on the ScanSnap to start a scan.
ATTENTION
To enable automatic linkage with [Scan to Mobile], press the [Scan] button on the ScanSnap and
start a scan while [Scan to Mobile] is active (the Scan to Mobile menu appears on the menu bar).
Scanned images will be sent to the mobile device from the computer when the
scanning is completed.
HINT
When you select the [Wait until the [Send] button is clicked] checkbox in the [Scan to Mobile - Basic]
window, the [Send] button appears in the [Scan to Mobile] window. Click the [Send] button to send
the image to the mobile device.
5.
Click the [Close] button to close the [Scan to Mobile] window when
sending of the scanned image is completed.
HINT
The [Scan to Mobile] window closes automatically when the mobile device is disconnected from the
computer.
Using ScanSnap with the Quick Menu (for Mac OS Users)
328