Connect A Mobile Device To The Scansnap - Fujitsu scansnap ix500 Operator's Manual

Connect a Mobile Device to the ScanSnap

You can use the ScanSnap Wireless Setup Tool Wizard to configure and check the
connection between a mobile device and the ScanSnap. (→
To connect a mobile device to the ScanSnap without using the ScanSnap Wireless Setup
Tool, follow the procedure below.
1.
Start ScanSnap Connect Application on your mobile device.
The mobile device will automatically be connected to an available ScanSnap on the
same network.
HINT
If more than one available ScanSnap is detected when ScanSnap Connect Application is set for a mobile
device not to be connected to a ScanSnap automatically, tap the name of the scanner you want to
connect to under [Scanner] on the [Connect to] screen. For details, refer to the ScanSnap Connect
Application User's Guide for your mobile device.
Connecting the ScanSnap to a Wireless LAN
55
page 52)