Fujitsu scansnap ix500 Operator's Manual page 72

ATTENTION
If the system requirements above are not satisfied, the ScanSnap may not operate.
Do not use the USB port on the keyboard or the monitor to connect the ScanSnap (it may not function
properly).
Make sure to use a powered hub equipped with an AC adapter if you are using a commercially
available USB hub.
Scanning speed will slow down in the following cases:
- The CPU or the memory does not meet the required specifications
- The version of the USB port or the USB hub is USB 1.1
The actual increase in used disk space after installation and the required disk space for installation
may differ from each other depending on your Windows system disk management.
A disk space approximately three times larger than the resulting scanned file size is required when
scanning documents.
Characters may not be correctly displayed when using the following functions:
- CardMinder
- Scan to Mobile
- Scan to Salesforce Chatter
- Scan to SugarSync
- Scan to Dropbox
Perform the following:
Windows XP
- Select [Control Panel] → [Regional and Language Options] → [Language] tab → [Install files
for East Asian languages] check box.
- Install the universal font (Arial Unicode MS) from the setup disc for Microsoft Office 2000 or
later.
Windows Vista/Windows 7/Windows 8
Install the universal font (Arial Unicode MS) from the setup disc for Microsoft Office 2003 or later.
HINT
For Windows 8, Windows Vista or Windows XP, .NET Framework 3.5 SP1 may be installed (maximum
of 500 MB free disk space required) at the same time as the following software:
- ScanSnap Manager
- ScanSnap Organizer
- CardMinder
For Windows XP, .NET Framework 2.0 may be installed (maximum of 280 MB free disk space
required) at the same time as the following software:
- Scan to Microsoft SharePoint
72
System Requirements