Fujitsu scansnap ix500 Operator's Manual page 455

6.
Close the ADF top section.
It clicks when it returns to its original position.
7.
Connect the power cable, and turn on the ScanSnap.
8.
Reset the Roller set counter.
1.
Select [Check consumable status] from the Right-Click Menu.
For details about the Right-Click Menu, refer to
37).
The [ScanSnap Manager - Check consumable status] dialog box appears.
2.
Click the [Reset] button for [Roller Set Count].
A confirmation message appears.
3.
Click the [Yes] button.
The counter turns "0".
ADF paper
chute (cover)
ADF top
section
"Right-Click Menu (Windows)" (page
455
Replacing the Roller Set