Glass Burner Installation / Removal - Pacific energy BRISTOL Installation And Operating Instructions Manual

Air Deflector Installation / Removal
Installation
Position the air de ector in the replace as seen
in Figure 79 and secure with two screws using a
screwdriver.
Removal
Remove the two screws seen in Figure 79 using a
screwdriver, and remove the air de ector from replace.
Burner Tray Installation / Removal
Installation
Place the burner tray in the replace and secure with 4
screws using a screwdriver, as seen in Figure 80.
Removal
Remove the 4 screws seen in Figure 80 using a screw-
driver, and remove the burner tray.
Glass Installation
To install the glass, evenly spread a thin layer of
crushed glass across the entire burner pan as seen in
Figure 81. Ensure glass does not cover pilot.
Rock Installation (Optional)
To install the optional rock set, place rocks making sure
no rocks are in the ame when the unit is lit.
Figure 78: Glass burner kit.
BRSL.BODYB
050216-44
BDFD.BODYB

Glass Burner Installation / Removal

Figure 79: Air de ector - Glass burner.
Figure 80: Burner tray - Glass.
Figure 81: Glass installation.
Figure 82: Rock placement.
37
Screws
5055.633-B