Pacific energy BRISTOL Installation And Operating Instructions Manual page 30

Figure 51: Back ledge removal.
6. Remove two screws which hold the back ledge (Figure 51) in place and remove.
7. Remove the approximately 25 screws hold the base plate (Figure 52) to the frame of the rebox.
8. Gently remove the base plate (Figure 53) and set aside to the right hand side of the rebox. There is no
Figure 53: Base plate moved to the right side.
5055.633-B
Figure 52: Removing base plate.
Figure 54: Nut location.
30
BRSL.BODYB
050216-44
BDFD.BODYB